Description
Image Clip® Laser Dark heat transfer paper is designed for transferring solid colour logos, graphics or text onto bright and dark coloured cotton and polyester fabrics. It transfers the printed areas only so there is no need to cut around the image.
Simply print the imaging sheet, press it onto the transfer sheet with a heat press, peel the two sheets apart and then press the image onto your chosen substrate.
CLICK HERE FOR FULL INSTRUCTIONS
You will need a laser printer and a heat press
A self-weeding laser transfer paper which transfers colour onto bright or dark fabrics
- Suitable for transferring solid colour images onto bright or dark coloured cotton or polyester fabrics
- Compatible with most laser printers* - you may have to adjust the image settings and paper settings
- Approved by OKI for use with their printers INDIGO Certified for the 7000-1000 series
- Mirror or reverse your image before printing
- Self-weeding - A thin white film coating is transferred onto printed areas only
- Use a heat press for application
Sizes available: A4 and A3 sheets*
*The transfer sheet is approx. 12mm shorter than A4 & A3 in each direction so that it is not mistaken as the imaging (printing) sheet
Other pack sizes: 10, 25, 50, 100 etc
Manufactured by Neenah Inc, founded in Neenah, Wisconsin in 1873. Their paper brands are among the most recognized and preferred in North America and are available on six continents. Neenah has been an industry leader in the creation, development and improvement of digital transfer products since its first patent was granted in 1980.
(!) Please test this product prior to production to determine the best settings for your equipment. yolö cannot be held liable for any loss or injury arising out of the use of, or inability to use this product.
*We cannot guarantee compatibility with specific printers unless they are listed as compatible. If in doubt, consult your printer manufacturer before use. Please test this product prior to production to determine the best settings for your equipment. We recommend testing the paper before production or before attempting to print several sheets at once.
FAQs
What type(s) of image can this product transfer?
Images with solid intense colours (60%+ saturation) are recommended. White or light colours will not transfer.
*Will this paper work with my laser printer?
We cannot guarantee compatibility with specific printers. If in doubt, consult your printer manufacturer before use. Please test this product prior to production to determine the best settings for your equipment.
What print settings should I use?
Run a few sheets of blank paper through your printer to warm it up and select normal print/image quality. Starting with a normal or plain paper setting, print one sheet of transfer paper at a time using a bypass tray if possible. Gradually increase the paper weight setting** until the toner fuses well and the image does not smudge.
**Papers will usually work better on a slower paper setting e.g. heavy paper, transparency or label mode but always start with a normal paper setting and increase the paper weight setting gradually to reduce the chance of jamming.
Do I have to cut out my image?
No. This paper is designed to be 'self-weeding' which means that there is no need to cut and weed the image. Only printed areas will be transferred.
What colour(s) of fabric can I transfer onto?
This product is recommended for bright or dark coloured fabric. The transfer has an opaque (white) layer to hide the colour of the fabric.
Can this paper be hand-ironed?
Image Clip® paper is almost impossible to hand-iron as it requires accurate and even heat and pressure. Using a heat press is essential.
