SEF FlexCut Puff - Cricut® size - 4 Colours

SEF FlexCut Puff is an expanding, heat transfer vinyl, able to give a fantastic 3D quality to your designs.

Available colours:  white, black, yellow and red

Prior to the transfer process, it looks like a normal heat transfer vinyl.  During the transfer process it expands, resulting in a very special 3D surface effect.  All kind of designs can be cut using a drag-knife or contour cutter and it can be weeded as usual.

Features

• Waterbased PU
• Thickness (without liner) : 60 (before heat transfer) 500µ (after heat transfer)
• Fastness: 40°C

Transfer Process

• Transfer Temperature: 140°C/285°F
• Transfer Time: 10 seconds
• Pressure: Medium/High
• Peel: Warm
• Second Press: Press again for 10 seconds

CLICK HERE FOR FULL INSTRUCTIONS

Other Sizes available: A4 sheets, 500mm wide rolls*, Free Off-Cuts** and Cricut-friendly size (30cm x 29cm)
*Where possible, orders for more than 1 metre will be supplied on a single continuous roll
**We are happy to supply free off-cuts for colour reference.  These are limited to one off-cut per product colour and ten off-cuts per order and will only be supplied if we have the off-cut in stock. 

SEF FlexCut has the STANDARD 100 by OEKO-TEX® Class II certificate.  This standard means FlexCut has been tested for harmful substances and therefore is harmless for human health.  The test is conducted by independent OEKO-TEX® partner institutes and take into account numerous regulated and non-regulated substances which may be harmful to human health. 

Manufactured by SEF France, based in Laval, Western France and founded in 1975. In their 7000 square metre factory they manufacture a wide range of unique materials producing 4.5 million square metres per year.  SEF introduced their first digital cutting vinyl in the late 90's and each year introduces new collections and new textures driving forward innovation in the industry.