Techni-Print® EZP Laser Heat Transfer Paper

Items in the Bulk Buy section can take 2 weeks for delivery

Techni-Print® EZP* (for Easy Peel) heat transfer paper is designed for transferring all types of images onto white and light coloured cotton and polyester fabrics. It is a thin transfer and is great for photo-quality images.

Simply print your image with a laser printer, cut out your design with a contour (plotter) cutter or scissors and press onto your chosen substrate with a heat press.

CLICK HERE for FULL INSTRUCTIONS

You will need an laser printer, a digital cutter or scissors, a hand iron or heat press, and silicon or teflon sheets.

A soft laser transfer paper suitable for transferring photo-quality images

• Suitable for transferring all types of images onto white or light coloured cotton or polyester fabrics
• Compatible with most laser printers* and - you may have to adjust the image settings and paper settings
• Approved by OKI for use with their printers INDIGO Certified for the 7000-1000 series
• Mirror or reverse your image before printing
• Transfers a thin clear film background behind the image
• Use a heat press for application

Sizes available: A4 and A3 sheets

Manufactured by Neenah Inc, founded in Neenah, Wisconsin in 1873. Their paper brands are among the most recognized and preferred in North America and are available on six continents. Neenah has been an industry leader in the creation, development and improvement of digital transfer products since its first patent was granted in 1980.

(!) Please test this product prior to production to determine the best settings for your equipment.
yolö cannot be held liable for any loss or injury arising out of the use of, or inability to use this product but will happily replace any product proven to be defective.

*We cannot guarantee compatibility with specific printers unless they are listed as compatible. If in doubt, consult your printer manufacturer before use. Please test this product prior to production to determine the best settings for your equipment. We recommend testing the paper before production or before attempting to print several sheets at once.
 

FAQs

*Will this paper work with my laser printer?
We cannot guarantee compatibility with specific printers. If in doubt, consult your printer manufacturer before use. Please test this product prior to production to determine the best settings for your equipment.

What print settings should I use?
Run a few sheets of blank paper through your printer to warm it up and select normal print/image quality. Starting with a normal or plain paper setting, print one sheet of transfer paper at a time using a bypass tray if possible. Gradually increase the paper weight setting** until the toner fuses well and the image does not smudge.
**Papers will usually work better on a slower paper setting e.g. heavy paper, transparency or label mode but always start with a normal paper setting and increase the paper weight setting gradually to reduce the chance of jamming.

Do I have to cut out my image?
Cutting around your image before applying is recommended as unprinted areas of the clear film may be visible on the fabric. You can cut out your image with a craft knife or scissors but contour cutting is recommended for best results. If contour cutting, set the blade to cut through both the film layer and backing paper.

What colour(s) of fabric can I transfer onto?
This product is recommended for white or light coloured fabric. The fabric colour shows through the clear film so you cannot transfer a colour lighter than the colour of the fabric itself.

Can this paper be hand-ironed?
Techni-Print® EZP can be hand ironed, however, some household irons are not able to reach required temperatures for this paper. Heat press application is recommended for best results as due to the lesser amount of pressure and heat, ironing on the product will not be as durable when laundered. If you intend to use a hand iron for this transfer paper then please purchase a sample pack to check you are happy with the results.